Skip to main content

Steeping In The Mud


the lotus flower blooms 
most beautifully
from the deepest and thickest mud.

Lotus Pod Pendant - Vitreous Enamel and Silver

Namaste
Kalaya
Labels:

Comments

Post a Comment

I would love to hear from you!

Popular posts from this blog

The Risk to Bloom

It all started with an acorn button and grew from there. In an earlier post I mentioned this button swap blog hop, that I am participating in, and how I was immediately drawn to the acorn button.  Every day I would hold it in my hand, feel its essence, exam it, and then put it down.  This lasted for about 2 weeks. Then I remembered I had etched an oak tree on to brass when making buttons for my partner Kylie of Lotus Out Loud .  And... so begins the journey of creating something with this wonderful acorn button, which only started yesterday. Haha!  Etched brass was copper riveted to a piece of oak.  Merci beaucoup Papi for finding some oak!   I am using what Jesse taught me in his workshop .  It was the first time trying his technique.  It worked beautifully! The riveted brass was then captured with a piece of pierced copper. Voila! And then the day came  when the risk to remain tight in...
24 comments
Read more

Pepe Jump Ring Maker...New Is Not Always Better...

For the follow up (2014) on jump ring makers go here . Introducing Pepe's new AND improved Jump Ring maker... When I received my new jump ring maker I knew the new model was more compact but did not expect it to be so unstable.  It was precarious but I accepted it.  After all I will have jump rings galore with a single swipe!  The outcome outweighed the little difference and yes...I am lazy!  hahaha!!! To the bench I go to test things out. Test No. 1 The first set of jump rings turned out great!  I was satisfied.   ☺ I then received an email saying that the top plate (cover) that came with the system was too thick and needed to be replaced.  Okay.   I receive the new plate but did not test it out until some friends were over and wanted a demo.  Well...it was difficult to place the handpiece collar over the plate.  It did not fit over the coil holding device very well.  I had to finagle it to go in ...
7 comments
Read more

Mandalas

Mandalas have been on my mind a lot lately.   Struggling to find my truth.   I find making these in the studio calms me. Vitreous enamel, steel, and silver. Silver and copper ring Even though I knew that hard solder melts at 1450 degrees I still had to try enameling the copper.  In theory the solder should not have run.  If I only took it out of the kiln a minute sooner this may not have happened. A total melt down but I love that color!  :) Vitreous enamel, copper, and 22k gold leaf My intention for the above mandala was a ring.  The challenge was difficult but I managed to make it. Vitreous enamel, copper, 22K gold leaf, and silver I feel myself pivoting once again and feeling the need to create amulets and talismans but in sculpture form. Each person's life is like a mandala - vast, limitless circle. We stand in the center of our own circle, and everything we see, hear and think forms the mandala of our life...everything t...
2 comments
Read more