Skip to main content

Itching to Etch

This weekend I set up my etching station.  

I guess I am doing this old school because there is a lot of chatter about using copper sulfate instead of ferric chloride, which is what I used.  What I did not do was change out my etching solution (an attempt to not waste) and it has been there FOREVER!  

I used two different types of pens, fine Sharpie black paint pen (oil based) and black Sharpie (regular old black Sharpie) as a resist (the part that etching solution will not eat away) on brass. 
 I got great results with the paint pen Sharpie but not the regular old Sharpie.  The regular Sharpie washed off in the enchant solution.  However, the paint pen was too thick for me to draw with so I ran out and got an EXTRA FINE paint Sharpie.

I decided that the enchant solution was too old so I neutralized with baking soda and replaced with fresh enchant before proceeding.


Here we go:
1.  Stamp an image (I used StazOn ink) to the metal, i.e. brass, 
or draw something using a resist pen.  I used a paint Sharpie pen (oil based).  I drew an Om symbol, shown below the stamped image.

2.  Cover the back (side without the image) with packing or duck tape.  I also sealed the edges with paint Sharpie oil based to seal it off.  That way the etching solution will not eat away the back of your metal or the edges.

3.  Double up a piece of packing tape and place it on the back of the metal (side without the image) and tape it to a piece of Styrofoam.

4.  Place the Styrofoam face down with your piece, image facing the etching solution.  
Notice the air pump taped to the container.  It helps move the etching solution around and dislodges any residual metal from your piece.
5.  Check after 30 minutes, especially since this is fresh etching solution.

Tada!!!
Close up of the etching.  A nice deep etch.
I like the way my drawing came out.

If you would like more details on etching you can go to this website Making Jewelry Now.  It has everything you need to know about etching and more!

I would like to use the E3 Etch system by Sherri Haab.  It seems to have many advantages and etching is only one of them.  I will have to see how much I etch before investing in one but it looks like a real cool tool to have!

What are you creating?

Namaste
Kalaya

Comments

  1. aiiiighhh! i want to come over and etch!!! they came out great!!!

    ReplyDelete
    Replies
    1. You may come over any time. We definitely need to have an art pow wow soon just like Lorena Angulo did last week.

      The etching was meditative after I figured out what to etch. That is the hard part for me. I just finished making some of my components with this etch. Stay tuned!!! Merci Beaucoup!

      Delete
  2. the etching came out fabulous - really... i had never thought of styrofoam to float them! i usually drape them across the solution... i have to admit - i use the toxic radio shack solution, but it works... i just try to make it last for a long time! (which you cannot always do)... love your results -

    ReplyDelete
    Replies
    1. Merci! I draped them across once and no more. I made such a mess. Ha! Have not tried this but I read that you can add ester c powder to prolong your etching solution. Thanks again!

      Delete
  3. oh man, This is so awesome! We did etching like this at nocca, and it was soooo interesting and so much fun - you're makin me miss it! Your design is fantastic

    ReplyDelete

Post a Comment

I would love to hear from you!

Popular posts from this blog

The Risk to Bloom

It all started with an acorn button and grew from there. In an earlier post I mentioned this button swap blog hop, that I am participating in, and how I was immediately drawn to the acorn button.  Every day I would hold it in my hand, feel its essence, exam it, and then put it down.  This lasted for about 2 weeks. Then I remembered I had etched an oak tree on to brass when making buttons for my partner Kylie of Lotus Out Loud .  And... so begins the journey of creating something with this wonderful acorn button, which only started yesterday. Haha!  Etched brass was copper riveted to a piece of oak.  Merci beaucoup Papi for finding some oak!   I am using what Jesse taught me in his workshop .  It was the first time trying his technique.  It worked beautifully! The riveted brass was then captured with a piece of pierced copper. Voila! And then the day came  when the risk to remain tight in a bud was more painful than the risk to bloom.

South of the border in Oaxaca, Mexico

I've been idle for too long but I have lots to share with you! Oh where to begin?   Let me first say that Oaxaca is a place full of beautiful people.  The city was VERY safe and the place we stayed in was absolutely wonderful.  And the very best thing about it all...the plane ride was only 3.5 hours from New Orleans!  Gotta love that. I don't want to bore you with all the details so I think I will stick to the art side of things.  Oaxaca is known for their textiles but I didn't take any pictures of any textiles.  :(  Lo siento. There was this place that we stumbled upon called La Mano Magica  #26 Macedonio Alcala 203, Centro .  This place had a variety of high end pieces for the taking and a price.  Off to the side we noticed a show going on and I immediately knew the work.  It was the work of ceramicist Alfonso Castillo.  One of the the great folk artist of Mexico.   Eeeee!!! How exciting! FAMILIA CASTILLO Candelabro Ofrenda a mi papa Alfonso died i

The Arrowmont Experience Pt. 1

I know from previous experience that I had to ask the driver to stop at a grocery store before dropping us off at Arrowmont.  I was feeling so good about having all my ducks in order and then this happened! I'm sure I screamed WTH because everyone was looking at me but I wasn't the only one in shock. I was thinking...great!  Now I will have to walk to get my wine.  LOL!!! Arrowmont for 2 entire weeks!  Yeah....Bring it on.  I can do this...roommate annd all. I was in Anne Havel's  All Fired Up: Who Knew a Torch Could Do All This? My notebook for ALLLllllll the notes I'm going to take. OMG!  I don't know where to begin.  I have so much to share.  Let's see... I fell in love with a cup. Annnd...then I bought a cup made by Jason B. Burnett.  He had me at the hexagons. Just an aside here.  I couldn't buy the cup I fell in love with.  Arrowmont has an assortment of ceramic cups in the mess hall to use.  I could post a cup a day on I