Skip to main content

Making Bottle Cap Magnets

I must admit that there is something calming when preparing bottle cap magnets.  Come join me in my journey of making these beauties.  Here was my experience with the whole process.

Materials: 
o  Bottle caps
o  Diamond glaze or Resin
o  One inch hole punch
o  Images
o  Card stock
o  Mod Podge
o  E6000
o  Magnets
o  Tim Holtz Linen and Vintage ink

1.  Prepare your image and punch the images out.
(I make the image small enough so that I can punch out 1 inch circles on card stock.) 

2.  I then distressed the images to make them look old.  
If you are going to draw or write on your inches now is the time to do it because writing on sealed images is kind of tough.

3. Spread Mod Podge inside the bottle cap.

4.  Place your image inside the bottle cap.


5.  Spread more Mod Podge on top of the image.  Be sure to get the edges.

6.  Let these babies dry overnight.

7.  Now is the time for Diamond Glaze.
I think the hard part is trying not to get bubbles.  I held the dispenser upside down and dabbed a little on the side, on a piece of paper, to get the bubbles out before filling up the bottle caps.  I fill the caps all the way to the top.  Let them dry overnight undisturbed.  

What I've learned:
I covered them up overnight so dust or the occasional bug wouldn't get in the glaze but this slowed down the drying process. I don't think this would happen with resin but I'll have to experiment.  So the next day I uncovered them and they started setting.  Yay!  At first I thought the Diamond Glaze was bad and I ruined 48  bottle caps!!! 

8.  Adding the magnet.  Use E6000 for this.  I just dab some glue to the magnet (enough so that some of the glue oozes out when pressed to the bottle cap).
Be sure to place the bottle cap with magnets far away from each other or you will get instant attraction and a whole mess of bottle cap magnet ball. 

9.  Now you have beautiful bottle cap magnets!  

Namaste
Kalaya
Labels:

Comments

  1. Jenifer LeoneJanuary 19, 2012 at 3:40 AM

    I don't know exactly what you make of these caps. but i like all these. Pretty job. if some one wants more stuff. she can check this anytime -:Magnets For Bottle Caps

    ReplyDelete
  2. Kalaya SteedeJanuary 19, 2012 at 7:04 AM

    Jenifer thanks for the info. Looks like a good source for bottle caps and more!

    ReplyDelete
  3. Shannon @FairfaceWashclothsJanuary 16, 2013 at 2:34 PM

    How long would you say it took for the glaze to set completely? Going to do this project with out after-school program. Thanks!
    Shannon

    ReplyDelete
    Replies
    1. Kalaya SteedeJanuary 16, 2013 at 2:56 PM

      Hi Shannon. It took overnight before I could see it clearly and I believe the instructions say 24 hours to set completely. Hope this helps. Thanks for stopping by!

      Delete

Post a Comment

I would love to hear from you!

Popular posts from this blog

The Risk to Bloom

It all started with an acorn button and grew from there. In an earlier post I mentioned this button swap blog hop, that I am participating in, and how I was immediately drawn to the acorn button.  Every day I would hold it in my hand, feel its essence, exam it, and then put it down.  This lasted for about 2 weeks. Then I remembered I had etched an oak tree on to brass when making buttons for my partner Kylie of Lotus Out Loud .  And... so begins the journey of creating something with this wonderful acorn button, which only started yesterday. Haha!  Etched brass was copper riveted to a piece of oak.  Merci beaucoup Papi for finding some oak!   I am using what Jesse taught me in his workshop .  It was the first time trying his technique.  It worked beautifully! The riveted brass was then captured with a piece of pierced copper. Voila! And then the day came  when the risk to remain tight in a bud was more painful than the risk to bloom.
24 comments
Read more

Pepe Jump Ring Maker...New Is Not Always Better...

For the follow up (2014) on jump ring makers go here . Introducing Pepe's new AND improved Jump Ring maker... When I received my new jump ring maker I knew the new model was more compact but did not expect it to be so unstable.  It was precarious but I accepted it.  After all I will have jump rings galore with a single swipe!  The outcome outweighed the little difference and yes...I am lazy!  hahaha!!! To the bench I go to test things out. Test No. 1 The first set of jump rings turned out great!  I was satisfied.   ☺ I then received an email saying that the top plate (cover) that came with the system was too thick and needed to be replaced.  Okay.   I receive the new plate but did not test it out until some friends were over and wanted a demo.  Well...it was difficult to place the handpiece collar over the plate.  It did not fit over the coil holding device very well.  I had to finagle it to go in and when I started sawing the handpiece did not move sm
7 comments
Read more

South of the border in Oaxaca, Mexico

I've been idle for too long but I have lots to share with you! Oh where to begin?   Let me first say that Oaxaca is a place full of beautiful people.  The city was VERY safe and the place we stayed in was absolutely wonderful.  And the very best thing about it all...the plane ride was only 3.5 hours from New Orleans!  Gotta love that. I don't want to bore you with all the details so I think I will stick to the art side of things.  Oaxaca is known for their textiles but I didn't take any pictures of any textiles.  :(  Lo siento. There was this place that we stumbled upon called La Mano Magica  #26 Macedonio Alcala 203, Centro .  This place had a variety of high end pieces for the taking and a price.  Off to the side we noticed a show going on and I immediately knew the work.  It was the work of ceramicist Alfonso Castillo.  One of the the great folk artist of Mexico.   Eeeee!!! How exciting! FAMILIA CASTILLO Candelabro Ofrenda a mi papa Alfonso died i
Post a Comment
Read more